
Duct camera inspections
A recorded pass through supply and return trunks, with findings you can watch rather than take on faith.
When Filmore buildings collect dust complaints, our New Orleans crew opens the ducts, cleans them under containment and leaves the photos to prove it.
Free, technical, and it ends in a written price that does not drift.
Now you can finally discover why your business building feels stuffy. This local service keeps your air ducts fresh.
Eventually your workspace gathers dust inside those hidden metal tunnels. Therefore hiring a pro crew makes total sense.
Naturally you want to know what happens when someone cleans those big metal tubes in your local establishment. This trade involves hooking up massive vacuum trucks outside your building. Then workers scrub every single inch of your metallic airway network. Which means all that trapped grime vanishes completely from your property.
Plus dirty airways cause your utility bills to shoot through the roof. Workers notice massive dust bunnies hiding near every vent.
Meanwhile your employees cough because of bad indoor air quality. That is why routine maintenance saves you plenty of headaches.
On top of that clean ventilation systems help your HVAC units last much longer. This lets you avoid expensive repair bills down the road. Every business owner appreciates saving hard earned cash on machinery upkeep.
Basically ignoring your hidden metal runs creates a huge fire hazard. Lint and grease build up over many years of heavy use.
Consequently a spark can ignite that debris in seconds. Nobody wants their workplace going up in smoke unexpectedly.
Sometimes you notice strange odors coming straight from the ceiling vents. That smell usually means mold is growing inside the dark metal pipes.
Furthermore dark dust streaks appear around the wall registers very fast. Whenever you see those marks you need immediate help.
Right away the friendly crew arrives at your commercial building on schedule. They inspect every single duct using specialized cameras.
Afterwards they seal off the vents to protect your office furniture. This careful setup ensures zero mess remains after they finish working.
Following that preparation phase the heavy duty vacuum creates powerful suction. Technicians run rotating brushes down the long metal corridors. All loosened particles get sucked away into giant collection bags outside.
| Step | Action Taken | Main Benefit |
|---|---|---|
| Inspection | Camera check | Finds hidden blockages |
| Prep | Vent sealing | Protects your office |
| Cleaning | Brush vacuum | Removes all dust |
Truly you deserve the absolute best treatment for your business property. Our local team brings years of hands on trade experience.
Equally important we treat your workspace with total respect and care. You will never find a wandering mess left behind here.
Beyond that our pricing stays completely transparent from the very start. No hidden fees pop up on your final bill ever.
Being based right near the New Orleans neighborhood of Filmore means fast response times. We know the local climate creates extra humidity inside metal runs.
Besides that regional weather patterns demand specialized care for your ventilation system. Local businesses trust our dependable crew for every job.
Typically commercial properties use complex networks of galvanized steel runs. These require heavy commercial equipment rather than standard household vacuums.
Equally true our high powered machinery reaches deep into the main trunks. That thorough approach guarantees a remarkably high level of cleanliness.
Almost every business owner forgets about the air above their heads. Now is the perfect time to fix that lingering issue.
Instead of waiting for a breakdown you should plan ahead. Clean air keeps your entire staff happy and productive daily.
Whenever you are ready for a pristine workspace just reach out. We gladly offer a completely free estimate for any property owner.
Simply drop us a quick message or give our office a call. We gather some basic details about your commercial building layout.
Shortly after that conversation our team schedules a convenient visit. You get an honest assessment with zero pressure attached whatsoever.
Ultimately breathing clean air at work changes your entire daily routine. Your employees notice the difference immediately upon walking inside.
Therefore taking this step protects both your health and your equipment. Contact us today to claim your complimentary quote right now.

A camera goes into the trunk lines first. What comes back decides everything: which runs carry real buildup, which only need their registers washed, and which are clean enough to leave alone. The findings are shown to you, not summarized at you, and if the honest answer is that your ducts do not need cleaning yet, that is what the visit concludes.

Before anything is loosened, the section under work is isolated and a vacuum collector is coupled to the duct so air moves toward the machine and nowhere else. Floors get covered, ceiling tiles get numbered, and the occupied side of the building keeps working with no idea we are there.

Rotary brushes and compressed air tools work down each run toward the collector, taking the buildup off the metal rather than pushing it deeper. The camera goes back in afterwards. If a stretch still shows residue, it gets done again before the access points are sealed and the registers go back on.
Some buildings need one misbehaving system dealt with. Others need the whole air side reset to zero. The table is the honest version of that choice.
Large sites are phased so no floor loses more than one night, and the same crew lead stays on the job from the first shift to the last photo.

A recorded pass through supply and return trunks, with findings you can watch rather than take on faith.

Rotary brushes and air whips sized to each duct, working the full length of every run toward the collector.

Vacuum units with fine filtration pull everything loosened straight out of the ductwork and off site.

Blower wheels, plenum interiors and coils degreased and rinsed where the air actually picks up its speed.

Every visible fitting comes off, gets washed and goes back straight, because occupants judge the job by what they can see.

Before and after shots of each run and unit, labeled by floor, sent to whoever answers for the building.
It starts small. Gray fuzz on the desks two days after the janitorial pass. A smell like hot cardboard the first cold morning the heat comes on. A meeting room that feels used up twenty minutes into the hour. The person who sits under the same diffuser and swears the sniffles start on Monday and stop on Friday evening.
None of that proves the ductwork is dirty, and that is precisely why the camera goes in before any quote goes out. But when a building collects complaints of that shape, the supply and return runs are the one place nobody has looked, because nobody can without opening them. Years of drywall sanding, carpet fibers, kitchen aerosols and plain sediment ride the airstream and settle where the air slows down, and every startup of the fans stirs a little of it back over the people below.
After a proper cleaning, the change is undramatic and steady: filters load slower, the startup smell is gone, the dust cycle on the furniture stretches from days to weeks, and the complaints log goes quiet on the subject. Clean air does not announce itself. It just stops reminding people of the alternative.
Our estimator walks the building in Filmore with whoever knows it best, counts units and registers, lifts a few access panels and listens to what the occupants have been saying.
One document with the scope floor by floor, the night or weekend windows the work will use, and a figure that does not move once you sign it.
Drop cloths down, furniture sheeted where we pass, the first section isolated and coupled to the collector before a single fitting is opened.
Runs brushed to the collector, units and coils cleaned in place, each zone closed and its registers refitted before the crew moves on.
Access points sealed and labeled, the before and after file sent over, and a short note on anything worth budgeting for the years ahead.
Ceiling height, access hatches and how many years the system went untouched decide where inside these spans a building lands. The walkthrough turns them into one firm figure, and the walkthrough is free.
Containment is not a premium option. The section being cleaned is sealed and kept under suction toward the collector for as long as a tool is inside it, the collectors filter what they capture instead of relocating it, and the debris leaves in closed containers the same night. If a ceiling tile moved, it goes back. If a desk was sheeted, the sheet comes off and the desk looks exactly as its owner left it.
Proof beats promises. The camera footage from the inspection, the before and after photos of every run and the list of access points we cut and sealed all go to you, unedited. And when a run turns out not to need cleaning, the quote says so in writing, because a company that cleans ducts for a living should be the one telling you when yours are fine.
Almost never. The work is phased zone by zone during the hours you hand us, usually nights and weekends around Filmore, and each zone is finished, resealed and back in service before occupants return. Most tenants learn the ducts were cleaned from the memo, not from anything they saw.
By never letting it into them. The section under work is isolated and held under suction toward the collector, so loosened debris travels into the machine and not into the room. Floors and furniture along the route are covered anyway, because equipment gets carried through and belt and braces is the right dress code indoors.
With a camera, before any price is written. Buildup on the duct wall is either there or it is not, and you see the footage yourself. When an inspection finds runs that are still serviceable, the quote says so and shrinks accordingly.
Yes, and we would rather not skip them. The unit is where the air picks up speed, moisture and heat, so a spotless duct behind a dirty blower wheel is a job half done. Interiors, wheels, drain pans and coils are cleaned in place as part of a full building scope.
The dining room, the restrooms and the comfort systems are all standard scope. The grease exhaust over the cooking line is a different trade with different tooling, so it is priced separately at the walkthrough once we have seen the hood and the riser, and we tell you plainly if it needs a specialist instead.
A photo file with before and after shots of every run and unit, labeled by floor, plus the inspection footage and a note on the access points we added and sealed. It is the file you show an owner, an insurer or the tenant who asked, without needing us in the room.
Zoom for the lay of the land; the link lists further down name every community we book walkthroughs in from here.
Somewhere above these ceilings there is ductwork nobody has seen in years.
Book the walkthrough